S. M. Demir, F. Al-Turjman, A. Muhtaroglu, “Energy Scavenging Methods for WBAN Applications: A Review,” IEEE Sensors Journal, Vol. 18, No. 16, pp. 6477-6488, August 2018.
S. Chamanian, H. Ulusan, A. Koyuncuoglu, A. Muhtaroglu, H. Kulah, “An Adaptable Interface Circuit with Multi-Stage Energy Extraction for Low Power Piezoelectric Energy Harvesting MEMS,” IEEE Transactions on Power Electronics, June 2018.
A. Muhtaroglu, “Micro-Scale Energy Harvesting for Batteryless Information Technologies (Chapter 3)” in N. Bizon, N. M. Tabatabaei, F. Blaabjerg, E. Kurt (Eds.), “Energy Harvesting and Energy Efficiency: Technology, Methods, and Applications (Lecture Notes in Energy)” (book chapter), pp. 63-85, Springer, March 2017, ISBN: 978-3319498744.
H. Ulusan, S. Chamanian, W. P. M. R. Pathirana, Ozge Zorlu, A. Muhtaroglu, H. Külah, “A Triple Hybrid Micropower Generator with Simultaneous Multi-Mode Energy Harvesting,” Smart Materials and Structures, Vol. 27, No. 1, January 2018.
H. Ulusan, Ozge Zorlu, A. Muhtaroglu, H. Külah, “A Highly Integrated 3 V Supply Electronics for Electromagnetic Energy Harvesters with Minimum 0.4 V,” IEEE Transactions on Industrial Electronics, Vol. 64, No. 7, pp. 5460-5467, July 2017.
F. U. Qureshi, A. Muhtaroğlu, K. Tuncay, “Near-Optimal Design of Scalable Energy Harvester for Underwater Pipeline Monitoring Applications with Consideration of Impact to Pipeline Performance,” IEEE Sensors Journal, vol. 17, No. 7, pp. 1981-1991, April 2017.
E. Artun, “Estimation of carbon footprint of a university campus with sustainability initiatives: a case study,” 24th International Sustainable Development Research Society Conference, Messina, Italy, 12-15 June 2018.
A. Turan, E. Artun, S. Saner, “Assessment of Yuntdağı hydrothermal system in Dikili-İzmir region, Western Turkey,” 41st Annual Meeting of Geothermal Resources Council (GRC), Salt Lake City, Utah, USA, 1-4 October 2017
M. Sönmez,“Two Offers to Prevent Excessive Water Consumption: A Proposal for Industrial Design Departments of Universities,” International Journal of Water Resources and Environmental Engineering, Vol.8(2), pp 24-31, DOI: 10.5897/IJWREE2014.0531, available online at http://www.academicjournals.org/IJWREE, March 2016.
M. Sönmez, "Energy Efficiency Law: Role of Universities in Educating Energy
Managers," Journal of Materials Science and Engineering, B1, ISSN 2161-6221, pp. 358-
M. Sönmez, A. Muhtaroğlu, K. Tuncay, “Energy Efficiency Legislation in Turkey and
the Role of the Universities,” International Conference on Clean Energy 8 ICCI-2010),
Gazimagusa- N. Cyprus, Proceedings, Ref. No.: 10-03, September 2010.
M. Sönmez, M. Rahim, “Ekonomizerlerin Enerji Verimliliğine Etkisi- Bir
Düzeltme,” 17. Ulusal Isı Bilimi ve Tekniği Kongresi, Sivas Cumhuriyet Üniversitesi, Haziran
C. Yamalı, M. Sönmez, “Döner Rejeneratif Tip bir Atık-Isı Isı Degiştiricinin
Modellemesi,” TIBTD 6. Ulusal Kongresi Bildiri Kitabı, pp.588-599, 1987.
Y. Ercan, A. Durmaz, M. Sönmez, “Döner ve Reküperatif Tip Isı
Değiştirgeçlerinin İklimlendirme ve Tekstilde Atık Isı Kazanımı için
Uygulanması,” Türkiye Enerji Kongresi, WEC , Türk Milli Komitesi Bildiri
Kitabı, pp.77-89, 1986.
Y. Ercan, A. Durmaz, M. Sönmez, “Akaryakıtlı Fırınların Enerji Ekonomisi
Yönünden İncelenmesi,” TIBTD 4. Ulusal Kongresi Kitabı, pp.291-299, 1983.
M. Sönmez, “Enerjide Tutumluluk Projesi Yayınları,” ODTÜ ISILMAREN , Proje No:
1981-04-02-01-01, Yayın No: 1-5 , 1981-83.
N. Saryal,M. Sönmez, “Doğal Taşınımla Isı ve Kütle İletiminin Elektiriksel Andırımı,” TÜBİTAK Projesi Raporu, No: MİSAG 13.
C.O. Okoye and O. Solyalı, “Optimal sizing of stand-alone photovoltaic systems in residential buildings,” Energy, 126, 573–584, 2017.
M. E. Özser, O. Mohiuddin, “Synthesis, photophysical, structural and electronic properties of novel regioisomerically pure 1,7-disubstituted perylene-3,4,9,10-tetracarboxylic monoimide dibutylester derivatives,” Journal of Molecular Structure, 1158, 145-155. DOI: 10.1016/j.molstruc.2018.01.023.2018.
M. E. Özser, S. A. Sarkodie, O. Mohiuddin, G. Özeşme, “Novel derivatives of regioisomerically pure 1, 7-disubstituted perylene diimide dyes bearing phenoxy and pyrrolidinyl substituents: Synthesis, photophysical, thermal, and structural properties,” Journal of Luminance, 192,414-423.DOI:10.1016/j.jlumin.2017.07.019.2017.
Obaidullah, M., Esat, V., and Sabah, C., “Single- and multi-walled carbon nanotubes for solar cell applications”, International Journal of Modern Physics B, 2018, Vol. 32, No. 21, 26pp. [ISSN print: 0217-9792, ISSN online: 1793-6578] [DOI: 10.1142/S0217979218300074] [WOS: 000440827700001] [Journal covered in SCI]
Obaidullah, M., Esat, V., and Sabah, C., “Thin Film (6,5) Semiconducting Single-Walled Carbon Nanotube Metamaterial Absorber for Photovoltaic Applications”, Optical Engineering, 2017, Vol. 56, No. 12, 127101, 10pp. [ISSN print: 0091-3286, ISSN online: 1560-2303] [DOI: 10.1117/1.OE.56.12.127101] [WOS: 000419965800047] [Journal covered in SCI]
Obaidullah, M., Esat, V., and Sabah, C., “Polarization Independent Triple-Band (5,4) Semiconducting Carbon Nanotube Metamaterial Absorber Design for Visible and Ultraviolet Regions”, Journal of Nanophotonics, 2017, Vol. 11, No. 4, 046011, 14pp. [ISSN online: 1934-2608] [DOI: 10.1117/1.JNP.11.046011] [WOS: 000418511400018] [Journal covered in SCI-Expanded]
Zuberi, M. J. S., and Esat, V., “Evaluating the Effects of Size and Chirality on the Mechanical Properties of Single Walled Carbon Nanotubes through Equivalent-Continuum Modelling”, Proc. IMechE, Part L: Journal of Materials: Design and Applications, 2016, Vol. 230, No. 5, 913 – 926. [ISSN:1464-4207] [DOI: 10.1177/1464420715588217] [WOS: 000383402000001] [Journal covered in SCI-Expanded]
Zuberi, M. J. S., and Esat, V., “Investigating the Mechanical Properties of Single Walled Carbon Nanotube Reinforced Epoxy Composite through Finite Element Modelling”, Composites Part B: Engineering, 2015, Vol. 71, 1 – 9. [ISSN: 1359-8368] [DOI: 10.1016/j.compositesb.2014.11.020] [WOS: 000348889100001] [Journal covered in SCI]
Fatima, B., and Esat, V., “Computational Modelling and Analysis of Multi-Walled Carbon Nanotubes and Their Effects as Reinforcements in Polymer Composites”, ICCE 25 - The 25th Annual International Conference on Composites/Nano Engineering, Rome, Italy, 16-22 July 2017.
Fatima, B., and Esat, V., “Finite Element Modelling of Multi-Walled Carbon Nanotube Reinforced Polymer Composites”, AEM 2016 Conference Series – 8th International Conference on Advanced Nanomaterials, University of Surrey, Guildford, UK, 2016.
Zuberi, M. J. S., and Esat, V., “Estimating the Effect of Chirality and Size on the Mechanical Properties of Carbon Nanotubes through Finite Element Modelling”, Proceedings of ESDA2014 – 12th Biennial ASME Conference on Engineering Systems Design and Analysis, Copenhagen, Denmark, 2014, 7pp. [ISBN: 978-0-7918-4583-7] [DOI:10.1115/ESDA2014-20156] [WOS:000361402800046]
Islam Elgedawy, CRESCENT+: A Self-Framework for Reliable Composite Web Services Delivery, Iran J Comput Sci, Springer, Feb, 2018, DOI: 10.1007/s42044-018-0008-3.
Islam Elgedawy, Machine Consciousness as a service (MCaaS): a roadmap, Iran J Comput Sci, Springer, OCT, 2017, DOI: 10.1007/s42044-017-0002-1.
Islam Elgedawy, Digital Brain as a Service: An Approach For Achieving Organic Web Services, The Tenth International Conference on Advanced Service Computing, SERVICE COMPUTATION, IARIA, Barcelona, Spain, 2018.